New Study: Low Carbon Fuels as Potential Relief from Elevated British Columbia Fuel Costs

Since 2010, the average refining margins for gasoline in the Vancouver fuel market rose faster than in the rest of Canada, resulting in correspondingly higher gasoline prices.

The cost to consumers 2015-2017 of elevated refining margins was $2.4 billion, or $1,730 per household. Clean fuels can bring needed competition.

VANCOUVER, BRITISH COLUMBIA, CANADA, June 29, 2018 /EINPresswire.com/ — A new report conducted by Navius Research and sponsored by Advanced Biofuels Canada explores the causes of abnormally high fuel prices in the Vancouver region, and assesses the potential of clean fuels to provide more competition at the pump.

The cost to consumers of elevated refining margins was $2.4 billion, or $1,730 per household between 2015 and the end of 2017. This is equivalent to an average 13 cent per litre premium on gasoline and diesel over this period for the 80% of BC’s population living in the Lower Mainland and Vancouver Island.

The report builds on Navius’ 2015 assessment of 2010-2014 BC refining margins – a proxy for refiner profits – and finds that the refining margins and resulting costs to BC’s economy have grown since 2015.

Other findings:
• Since 2015, both wholesale fuel prices and refining margins departed even further from underlying crude supply costs to the Vancouver market
• These elevated refining margins and higher fuel prices appear to be the result of a lack of competition in the Vancouver fuel market, which was found to have adequate physical supply; no product shortages or scarcity pricing in this period were evident
• A high degree of concentration in the supply of fuels, and associated barriers to bringing new fuel types into the market have contributed to artificially high prices
• Costs to consumers from elevated refiner margins in the Vancouver fuel market were five times the incremental cost of renewable and low carbon fuel regulations
• Despite 2017 crude costs that were 15 cents per litre lower vs. those in 2010, Vancouver retail gasoline prices were 6 cents per litre higher, with 1 cent per litre of this amount coming from increased taxes
• Policy or market responses that increase refined product or crude supplies – for instance, from an expanded Trans Mountain pipeline or from increases in local refining capacity – were evaluated as unlikely to lower fuel prices as they do not introduce more competition into the fossil-fuel dominated market

In BC, the Renewable and Low Carbon Fuel Requirements Regulation requires progressively higher use of clean fuels in place of gasoline and diesel fuels. In the 2010-2016 period, these fuels reduced 6.37 million tonnes of greenhouse gases, and reduced other pollutants that degrade urban air quality.

The study examined the potential of the Renewable and Low Carbon Fuel Requirements Regulation to incentivize new, independent retail sales and fuel pricing strategies. Opportunities for this are constrained by BC’s carbon tax – which currently applies equally, and inexplicably, to low-carbon biofuels and as it does to high-carbon petroleum fuels – and by excise taxes that are applied on a volumetric rather than an energetic basis. Reform of fuel taxation is needed to attract investments in new fuels retailing. With appropriate adjustments to fuel taxation, the study finds that regulation compliance credit values could lower the cost of low carbon fuels by 35 cents per litre in the province.

British Columbians spend $7.7 billion every year on gasoline and diesel fuels alone, with most of that spending leaving the province. BC’s low carbon fuel regulations are starting to attract investments by globally innovative clean fuels technology companies; made-in-BC low carbon fuels can add economic value to the province and be a solution over time for record-high fuel prices.

The report is available at https://www.naviusresearch.com/publications/2018-refining-margins-british-columbia/

Ian Thomson
Advanced Biofuels Canada
6049470040
email us here


Source: EIN Presswire

CYCLONE POWER RETAINS TURNAROUND COUNSULTANT

ONE PLANET ONE ENGINE

PRODUCT LAUNCH MOVING FORWARD WITH AGGRESIVE STRUCTURE

CYCLONE POWER TECHNOLOGIES INC. (OTCBB:CYPW)

POMPANO BEACH, FLORIDA, UNITED STATES, June 29, 2018 /EINPresswire.com/ —

CYCLONE POWER RETAINS TURNAROUND COUNSULTANT

POMPANO BEACH, FL–(Marketwire – June 28, 2018) – Cyclone Power Technologies (OTC BB: CYPW) announced that it has retained John Flynn as a consultant to assist in the turnaround of the company and its ongoing operations. The Company has contracted Flynn to assist in restructure of capital and debt instruments, engineering and product launch initiatives.

"The product patents and the enhancements to existing patents are in the process of filing, and this will provide what we believe to be potentially strong competitive business advantages for our four engines that are slated for launch in late 2018. We have identified micro grid power generation and support, industrial process, and zero emission engine commercial marketplaces as our primary market launches."

"We have plans to complete our debt conversion plan and enhance our equity capital position in this quarter, and then to finalize the operating schedule to launch and test our Mark 1, 3, 5 and 10 engines, as well as integrate our engines into generators delivering nano and micro-grid solutions up to 10 Megawatts. Cyclone has partners in commercial solar micro-grids that have committed $1-5 million in preferred equity investment and in a cell phone tower and field support generator partner that has a thirty year history of installations with all cell phone carriers."

Flynn is the former co-founder, President and Chief Financial Officer of XPress-1, (NYSE XPO) from 2001-late 2005 and orchestrated the Company's growth from the pink sheets to the American Stock Exchange over his tenure there. "I am excited to participate in another potential micro cap growth story, and I believe we can look forward to the opportunities on the horizon as we strive to launch these engines, integrate operational solutions and observe first hand the demand side possibilities that can be realized with an efficient, all-fuel, low emission engine with excellent power/weight/optimization ratios."

Current Cyclone President Frankie Fruge commented, "Cyclone is excited to welcome John Flynn to assist in the restructure and launch of our product line. He is the leader we need to launch our revolutionary technology to a worldwide marketplace."

Safe Harbor Statement
Certain statements in this news release may contain forward-looking information within the meaning of Rule 175 under the Securities Act of 1933 and Rule 3b-6 under the Securities Exchange Act of 1934, and are subject to the safe harbor created by those rules. All statements, other than statements of fact, included in this release, including, without limitation, statements regarding potential future plans and objectives of the company, are forward-looking statements that involve risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. The company cautions that these forward-looking statements are further qualified by other factors. The company undertakes no obligation to publicly update or revise any statements in this release, whether as a result of new information, future events or otherwise.

About Cyclone Power Technologies
Cyclone Power Technologies is the developer of the award-winning Cyclone Engine — an all-fuel, clean-tech engine with the power and versatility to run everything from waste energy electric generators and solar thermal systems to cars, trucks and locomotives. Invented by company founder and Chairman Harry Schoell, the patented Cyclone Engine is a eco-friendly external combustion engine, ingeniously designed to achieve high thermal efficiencies through a compact heat-regenerative process, and to run on virtually any fuel — including bio-diesels, syngas or solar — while emitting fewer greenhouse gases and irritating pollutants into the air. The Cyclone Engine was recognized by Popular Science Magazine as the Invention of the Year for 2008, was included in a 2011 report by Popular Mechanics as an important waste energy technology for the future, and was twice presented with the Society of Automotive Engineers' AEI Tech Award. Additionally, Cyclone was named Environmental Business of the Year by the Broward County Environmental Protection Department.

For more information, visit www.cyclonepower.com

Cyclone Power Company Contact
Frankie Fruge, President
Tel: 954-943-8721
Frankie@cyclonepower.com
Investor@cyclonepower.com

Frankie Fruge
Cyclone Power Technologies Inc.
954-943-8721 ext. 104
email us here


Source: EIN Presswire

Membrane Chemicals Market 2018- Global Industry Analysis, By Key Players, Segmentation, Trends And Forecast By 2025

Membrane Chemicals – Global Market Demand, Growth, Opportunities, Manufacturers, Analysis of Top Key Players and Forecast to 2025

PUNE, MAHARASHTRA, INDIA, June 29, 2018 /EINPresswire.com/ — Membrane Chemicals Market 2018 

Wiseguyreports.Com Adds “Membrane Chemicals – Global Market Demand, Growth, Opportunities, Manufacturers, Analysis of Top Key Players and Forecast to 2025” To Its Research Database.

Description: 

This report studies the global Membrane Chemicals market status and forecast, categorizes the global Membrane Chemicals market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers in North America, Europe, Japan, China and other regions (India, Southeast Asia, Central & South America, and Middle East & Africa).

Membrane chemicals are the variants of specialty chemicals that are formulated to treat a vast range of RO/UF/NF/MF membrane foulants and scalants. In water intensive industries such as power, chemical, F&B, etc., demand for process water is outstripping the supply, due to which these industries have to recycle the wastewater to meet their daily operational requirements. Membranes are leveraged across various industries to eliminate these contaminants. 
The Asia-Pacific region is projected to grow significantly during the forecast period with developing nations, such as China and India, adopting strict environmental regulations. 
The global Membrane Chemicals market is valued at xx million US$ in 2017 and will reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2018-2025.

The major manufacturers covered in this report 
BWA 
Lenntech 
Kemira 
Genesys 
GE 

Request for Sample Report @ https://www.wiseguyreports.com/sample-request/3249598-global-membrane-chemicals-market-research-report-2018

Geographically, this report studies the top producers and consumers, focuses on product capacity, production, value, consumption, market share and growth opportunity in these key regions, covering 
North America 
Europe 
China 
Japan 
Southeast Asia 
India 
Other Regions (India, Southeast Asia, Central & South America and Middle East & Africa)

We can also provide the customized separate regional or country-level reports, for the following regions: 
North America 
United States 
Canada 
Mexico 
Asia-Pacific 
China 
India 
Japan 
South Korea 
Australia 
Indonesia 
Singapore 
Rest of Asia-Pacific 
Europe 
Germany 
France 
UK 
Italy 
Spain 
Russia 
Rest of Europe 
Central & South America 
Brazil 
Argentina 
Rest of South America 
Middle East & Africa 
Saudi Arabia 
Turkey 
Rest of Middle East & Africa

On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into 
Antiscalants  
Cleaners  
Pre-treatment Chemicals 
On the basis of the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate for each application, including 
Food and Beverages  
Paper and Pulp  
Water and Waste Water Treatment  
Others 

Enquiry before Buying @ https://www.wiseguyreports.com/enquiry/3249598-global-membrane-chemicals-market-research-report-2018

If you have any special requirements, please let us know and we will offer you the report as you want.

Table of Content:

Global Membrane Chemicals Market Research Report 2018 
1 Membrane Chemicals Market Overview 
1.1 Product Overview and Scope of Membrane Chemicals 
1.2 Membrane Chemicals Segment by Type (Product Category) 
1.2.1 Global Membrane Chemicals Production and CAGR (%) Comparison by Type (Product Category)(2013-2025) 
1.2.2 Global Membrane Chemicals Production Market Share by Type (Product Category) in 2017 
1.2.3 Antiscalants  
1.2.4 Cleaners  
1.2.5 Pre-treatment Chemicals 
1.3 Global Membrane Chemicals Segment by Application 
1.3.1 Membrane Chemicals Consumption (Sales) Comparison by Application (2013-2025) 
1.3.2 Food and Beverages  
1.3.3 Paper and Pulp  
1.3.4 Water and Waste Water Treatment  
1.3.5 Others  
1.4 Global Membrane Chemicals Market by Region (2013-2025) 
1.4.1 Global Membrane Chemicals Market Size (Value) and CAGR (%) Comparison by Region (2013-2025) 
1.4.2 Status and Prospect (2013-2025) 
1.4.3 26 Status and Prospect (2013-2025) 
1.4.4 North America Status and Prospect (2013-2025) 
1.4.5 Europe Status and Prospect (2013-2025) 
1.4.6 China Status and Prospect (2013-2025) 
1.4.7 Japan Status and Prospect (2013-2025) 
1.5 Global Market Size (Value) of Membrane Chemicals (2013-2025) 
1.5.1 Global Membrane Chemicals Revenue Status and Outlook (2013-2025) 
1.5.2 Global Membrane Chemicals Capacity, Production Status and Outlook (2013-2025)

…….

7 Global Membrane Chemicals Manufacturers Profiles/Analysis 
7.1 BWA 
7.1.1 Company Basic Information, Manufacturing Base, Sales Area and Its Competitors 
7.1.2 Membrane Chemicals Product Category, Application and Specification 
7.1.2.1 Product A 
7.1.2.2 Product B 
7.1.3 BWA Membrane Chemicals Capacity, Production, Revenue, Price and Gross Margin (2013-2018) 
7.1.4 Main Business/Business Overview 
7.2 Lenntech 
7.2.1 Company Basic Information, Manufacturing Base, Sales Area and Its Competitors 
7.2.2 Membrane Chemicals Product Category, Application and Specification 
7.2.2.1 Product A 
7.2.2.2 Product B 
7.2.3 Lenntech Membrane Chemicals Capacity, Production, Revenue, Price and Gross Margin (2013-2018) 
7.2.4 Main Business/Business Overview 
7.3 Kemira 
7.3.1 Company Basic Information, Manufacturing Base, Sales Area and Its Competitors 
7.3.2 Membrane Chemicals Product Category, Application and Specification 
7.3.2.1 Product A 
7.3.2.2 Product B 
7.3.3 Kemira Membrane Chemicals Capacity, Production, Revenue, Price and Gross Margin (2013-2018) 
7.3.4 Main Business/Business Overview 
7.4 Genesys 
7.4.1 Company Basic Information, Manufacturing Base, Sales Area and Its Competitors 
7.4.2 Membrane Chemicals Product Category, Application and Specification 
7.4.2.1 Product A 
7.4.2.2 Product B 
7.4.3 Genesys Membrane Chemicals Capacity, Production, Revenue, Price and Gross Margin (2013-2018) 
7.4.4 Main Business/Business Overview 
7.5 GE 
7.5.1 Company Basic Information, Manufacturing Base, Sales Area and Its Competitors 
7.5.2 Membrane Chemicals Product Category, Application and Specification 
7.5.2.1 Product A 
7.5.2.2 Product B 
7.5.3 GE Membrane Chemicals Capacity, Production, Revenue, Price and Gross Margin (2015-2018) 
7.5.4 Main Business/Business Overview

Continued…..

Norah Trent
WiseGuy Research Consultants Pvt. Ltd.
+1 646 845 9349 / +44 208 133 9349
email us here


Source: EIN Presswire

Nebraska Mesothelioma Victims Center Now Urges a Public Utility Worker with Mesothelioma in Nebraska Or Their Family to Call for Instant Access to The Nation's Top Lawyers for Much Better Compensation

Please do not fall for Internet ads that suggest 'no lawsuit needed,' or that 'mesothelioma compensation is a result of submitting a claim form”

— Nebraska Mesothelioma Victims Center

NEW YORK, NEW YORK, USA, June 29, 2018 /EINPresswire.com/ — The Nebraska Mesothelioma Victims Center says, "We are appealing to a person with mesothelioma in Nebraska who had exposure to asbestos at a public utility, water/sewer district, or any type of power generating facility to call us anytime at 800-714-0303 to make certain they are talking directly to the nation's most skilled mesothelioma attorneys.

"While the best possible mesothelioma compensation might be deserved, a person with this rare cancer or their family will need to hire one of the nation's most skilled and experienced mesothelioma lawyers to earn a top client financial compensation settlement result. Please do not fall for Internet ads that suggest 'no lawsuit needed,' or that 'mesothelioma compensation is a result of submitting a claim form.' These suggestions are all total nonsense as we would like to discuss anytime at 800-714-0303." http://Nebraska.MesotheliomaVictimsCenter.Com

The Nebraska Mesothelioma Victims Center fears most public utility workers in the nation with mesothelioma will underestimate the value of their financial compensation claim. Typically, a mesothelioma financial compensation claim for a public utility worker with this rare cancer could start at about $500,000. However, if the diagnosed person does not hire one of the nation's most skilled mesothelioma lawyers and their legal team-the diagnosed person probably will not receive the very best possible financial compensation results.

"Before you hire a lawyer to assist a public utility worker in Nebraska with mesothelioma please call us anytime at 800-714-0303 for direct access to some of the nation's leading mesothelioma lawyers who will get the top compensation results for you or your loved one." http://Nebraska.MesotheliomaVictimsCenter.Com

For the best possible mesothelioma treatment options in Nebraska the Nebraska Mesothelioma Victims Center strongly recommends the following three heath care facilities with the offer to help a diagnosed victim, or their family get to the right physicians at each hospital. Creighton University Medical Center Omaha, Nebraska: http://www.creighton.edu/CancerCenter/, University of Nebraska Medical Center Eppley Cancer Center Omaha, Nebraska: http://www.unmc.edu/cancercenter/

Individuals in the state of Nebraska with mesothelioma could have been exposed to asbestos while serving in the US Navy or while working at a power plant, as a plumber, a boiler technician, as an auto repairman, as an electrician, or in the construction industry. In most cases, the exposure to asbestos took place in the 1950s, 1960s, 1970s, or 1980s. Mesothelioma typically takes three to five decades to develop. http://Nebraska.MesotheliomaVictimsCenter.Com

The states with the highest incidence of mesothelioma include Pennsylvania, Massachusetts, Maine, New Jersey, West Virginia, Florida, Wyoming, and Washington. However, mesothelioma does happen in Nebraska as the Nebraska Mesothelioma Victims Center would like to explain anytime at 800-714-0303.

For more information about mesothelioma please refer to the National Institutes of Health’s web site related to this rare form of cancer: http://www.nlm.nih.gov/medlineplus/mesothelioma.html

Michael Thomas
Nebraska Mesothelioma Victims Center
800-714-0303
email us here


Source: EIN Presswire

Commercial Cleaning Franchise Image One Gets Dirty for a Day in the Name of Charity

Image One team participated in exclusive 2018 Muddy Bunker Corporate Challenge to raise funds for Bunker Hill Charities

It isn’t often that I can say I literally ran through fire!”

— Tim Conn, President of Image One

ROLLING MEADOWS, IL, USA, June 28, 2018 /EINPresswire.com/ — 364 days of the year, Image One is laser-focused on ensuring facilities remain as clean as possible. June 9 was a slightly different day for the commercial cleaning franchise.

That’s because franchisees and members of the corporate team took part in a five-mile mud run on a 450-acre farm in northern Illinois alongside other businesses raising money for charity and building comradery every step (and climb) of the way.

The 2018 Muddy Bunker Corporate Challenge raised $125,000 for charities across Northern Illinois, including Bunker Hill Charities, the United Way, Crystal Lake Service League, MCC Student Vets of American and others.

Facing more than 30 obstacle courses, including jumping off a three-story platform during a “stunt jump” station, manually ziplining across a lake and scaling a tall mud trench in four-feet deep water, the team worked hard and got really wet and really, really, muddy.

“We had such a great time participating in the mud run and obstacles,” said Image One President and Co-Founder Tim Conn. “It was a really memorable experience that allowed us to be charitable and have a ton of fun with our team. I mean, it isn’t often that I can say I literally ran through fire!”

A franchise with around 100 franchise owners spread around Chicago and other cities around the U.S., Image One prides itself on giving back to the community and building deep relationships with franchise owners and team members. In addition to participating in events like this, franchise owners give time and resources to local charities and non-profits.

Moreover, Image One has a track record of providing great support to its franchise owners. The franchise itself has been recognized as a top low-cost franchise and one with high franchisee satisfaction according to third-party research.

After paying the Image One franchise fee, franchise owners pay minimal startup costs depending on whether they lease or rent equipment. Image One’s franchise program is ready-made to help owners hit the ground running operating their own commercial cleaning business. The resources available can help anyone over the age of 18 with a willingness to learn and a commitment to excellent customer service create a growth-focused, scalable cleaning business.

For more information, visit imageonusa.com

###

About the Image One franchise:

Image One USA is a commercial cleaning services business. The Image One franchising model was formed on the principles of transparency, training, and top-notch financial and customer service support. It is regularly recognized as a top franchise by third-party franchise and business publications, including CNBC.com, Entrepreneur.com and Franchise Business Review.

Image One franchisees work for themselves in a unique relationship with the franchise company. Image One provides them with customer support for their business, ongoing training, along with assistance with billing, equipment, and sales training. Image One has around 100 commercial cleaning franchise locations across the Midwest and Southeast, including Chicago, Cincinnati, Denver, Detroit, Fort Myers, Nashville and Orlando. Franchise territories are available nationwide.

For information on the franchise, visit http://ImageOneUSA.com.

Bob Spoerl
Image One USA
773.453.2444
email us here

Highlights from Muddy Bunker Corporate Challenge


Source: EIN Presswire

Smart Materials Market 2018- Global Industry Analysis, By Key Players, Segmentation, Trends And Forecast By 2023

Smart Materials – Global Market Demand, Growth, Opportunities, Manufacturers, Analysis of Top Key Players and Forecast to 2023

PUNE, MAHARASHTRA, INDIA, June 28, 2018 /EINPresswire.com/ — Smart Materials Market 2018    

Wiseguyreports.Com Adds “Smart Materials – Global Market Demand, Growth, Opportunities, Manufacturers, Analysis of Top Key Players and Forecast to 2023” To Its Research Database.

Description: 

The Smart Materials market revenue was xx.xx Million USD in 2013, grew to xx.xx Million USD in 2017, and will reach xx.xx Million USD in 2023, with a CAGR of x.x% during 2018-2023. Based on the Smart Materials industrial chain, this report mainly elaborate the definition, types, applications and major players of Smart Materials market in details. Deep analysis about market status (2013-2018), enterprise competition pattern, advantages and disadvantages of enterprise Products, industry development trends (2018-2023), regional industrial layout characteristics and macroeconomic policies, industrial policy has also be included. From raw materials to downstream buyers of this industry will be analyzed scientifically, the feature of product circulation and sales channel will be presented as well. In a word, this report will help you to establish a panorama of industrial development and characteristics of the Smart Materials market. 
The Smart Materials market can be split based on product types, major applications, and important regions. 

Major Players in Smart Materials market are: 
Vertellus 
Qingdao Jiapu 
Etrema 
GSP Chemical 
TDK Corporation 
Ioniqa 
Laird Tech 
Olikrom 
Smart Material Corporation 

Request for Sample Report @ https://www.wiseguyreports.com/sample-request/3217146-global-smart-materials-industry-market-research-report

Major Regions play vital role in Smart Materials market are: 
North America 
Europe 
China 
Japan 
Middle East & Africa 
India 
South America 
Others

Most important types of Smart Materials products covered in this report are: 
Piezoelectric Materials 
Shape-Memory Alloys 
Magnetostrictive Materials 
Smart Inorganic Polymers 
Temperature-Responsive Polymers 
Others

Most widely used downstream fields of Smart Materials market covered in this report are: 
Construction Industry 
Aircraft Manufacturing 
Pharma & Healthcare 
Military 
Automobile 
Others

Enquiry before Buying @ https://www.wiseguyreports.com/enquiry/3217146-global-smart-materials-industry-market-research-report

If you have any special requirements, please let us know and we will offer you the report as you want.

Table of Content:

Global Smart Materials Industry Market Research Report 
1 Smart Materials Introduction and Market Overview 
    1.1 Objectives of the Study 
    1.2 Definition of Smart Materials 
    1.3 Smart Materials Market Scope and Market Size Estimation 
      1.3.1 Market Concentration Ratio and Market Maturity Analysis 
      1.3.2 Global Smart Materials Value ($) and Growth Rate from 2013-2023 
    1.4 Market Segmentation 
      1.4.1 Types of Smart Materials 
      1.4.2 Applications of Smart Materials 
      1.4.3 Research Regions 
          1.4.3.1 North America Smart Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.2 Europe Smart Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.3 China Smart Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.4 Japan Smart Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.5 Middle East & Africa Smart Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.6 India Smart Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.7 South America Smart Materials Production Value ($) and Growth Rate (2013-2018) 
    1.5 Market Dynamics 
      1.5.1 Drivers 
          1.5.1.1 Emerging Countries of Smart Materials 
          1.5.1.2 Growing Market of Smart Materials 
      1.5.2 Limitations 
      1.5.3 Opportunities 
    1.6 Industry News and Policies by Regions 
      1.6.1 Industry News 
      1.6.2 Industry Policies

…….

8 Competitive Landscape 
    8.1 Competitive Profile 
    8.2 Vertellus 
      8.2.1 Company Profiles 
      8.2.2 Smart Materials Product Introduction 
      8.2.3 Vertellus Production, Value ($), Price, Gross Margin 2013-2018E 
      8.2.4 Vertellus Market Share of Smart Materials Segmented by Region in 2017 
    8.3 Qingdao Jiapu 
      8.3.1 Company Profiles 
      8.3.2 Smart Materials Product Introduction 
      8.3.3 Qingdao Jiapu Production, Value ($), Price, Gross Margin 2013-2018E 
      8.3.4 Qingdao Jiapu Market Share of Smart Materials Segmented by Region in 2017 
    8.4 Etrema 
      8.4.1 Company Profiles 
      8.4.2 Smart Materials Product Introduction 
      8.4.3 Etrema Production, Value ($), Price, Gross Margin 2013-2018E 
      8.4.4 Etrema Market Share of Smart Materials Segmented by Region in 2017 
    8.5 GSP Chemical 
      8.5.1 Company Profiles 
      8.5.2 Smart Materials Product Introduction 
      8.5.3 GSP Chemical Production, Value ($), Price, Gross Margin 2013-2018E 
      8.5.4 GSP Chemical Market Share of Smart Materials Segmented by Region in 2017 
    8.6 TDK Corporation 
      8.6.1 Company Profiles 
      8.6.2 Smart Materials Product Introduction 
      8.6.3 TDK Corporation Production, Value ($), Price, Gross Margin 2013-2018E 
      8.6.4 TDK Corporation Market Share of Smart Materials Segmented by Region in 2017 
    8.7 Ioniqa 
      8.7.1 Company Profiles 
      8.7.2 Smart Materials Product Introduction 
      8.7.3 Ioniqa Production, Value ($), Price, Gross Margin 2013-2018E 
      8.7.4 Ioniqa Market Share of Smart Materials Segmented by Region in 2017 
    8.8 Laird Tech 
      8.8.1 Company Profiles 
      8.8.2 Smart Materials Product Introduction 
      8.8.3 Laird Tech Production, Value ($), Price, Gross Margin 2013-2018E 
      8.8.4 Laird Tech Market Share of Smart Materials Segmented by Region in 2017 
    8.9 Olikrom 
      8.9.1 Company Profiles 
      8.9.2 Smart Materials Product Introduction 
      8.9.3 Olikrom Production, Value ($), Price, Gross Margin 2013-2018E 
      8.9.4 Olikrom Market Share of Smart Materials Segmented by Region in 2017 
    8.10 Smart Material Corporation 
      8.10.1 Company Profiles 
      8.10.2 Smart Materials Product Introduction 
      8.10.3 Smart Material Corporation Production, Value ($), Price, Gross Margin 2013-2018E 
      8.10.4 Smart Material Corporation Market Share of Smart Materials Segmented by Region in 2017

Continued…..

Norah Trent
WiseGuy Research Consultants Pvt. Ltd.
+1 646 845 9349 / +44 208 133 9349
email us here


Source: EIN Presswire

3D Printing Polymer Materials: Market Analysis, Strategies, Segmentation And Forecasts, 2018 To 2023

3D Printing Polymer Materials – Global Market Demand, Growth, Opportunities, Manufacturers, Analysis of Top Key Players and Forecast to 2023

PUNE, MAHARASHTRA, INDIA, June 27, 2018 /EINPresswire.com/ — 3D Printing Polymer Materials Market 2018

Wiseguyreports.Com Adds “3D Printing Polymer Materials – Global Market Demand, Growth, Opportunities, Manufacturers, Analysis of Top Key Players and Forecast to 2023” To Its Research Database.

Description: 

The 3D Printing Polymer Materials market revenue was xx.xx Million USD in 2013, grew to xx.xx Million USD in 2017, and will reach xx.xx Million USD in 2023, with a CAGR of x.x% during 2018-2023. Based on the 3D Printing Polymer Materials industrial chain, this report mainly elaborate the definition, types, applications and major players of 3D Printing Polymer Materials market in details. Deep analysis about market status (2013-2018), enterprise competition pattern, advantages and disadvantages of enterprise Products, industry development trends (2018-2023), regional industrial layout characteristics and macroeconomic policies, industrial policy has also be included. From raw materials to downstream buyers of this industry will be analyzed scientifically, the feature of product circulation and sales channel will be presented as well. In a word, this report will help you to establish a panorama of industrial development and characteristics of the 3D Printing Polymer Materials market. 
The 3D Printing Polymer Materials market can be split based on product types, major applications, and important regions. 

Major Players in 3D Printing Polymer Materials market are: 
TLC Korea 
Orbi-Tech 
Taulman3D 
Arevo 
Stratasys 
LG Chem 
DuPont 
3D HUBS 
3dsystems 
Materialise 
Rahn 
Exone 
MATTERHACKERS 
DSM 

Request for Sample Report @ https://www.wiseguyreports.com/sample-request/3217061-global-3d-printing-polymer-materials-industry-market-research-report

Major Regions play vital role in 3D Printing Polymer Materials market are: 
North America 
Europe 
China 
Japan 
Middle East & Africa 
India 
South America 
Others

Most important types of 3D Printing Polymer Materials products covered in this report are: 
PE 
PP 
PC 
PVC 
ABS

Most widely used downstream fields of 3D Printing Polymer Materials market covered in this report are: 
Electronics & Consumer Products 
Automotive 
Medical 
Industrial 
Education 
Aerospace 
Other Application

Enquiry before Buying @ https://www.wiseguyreports.com/enquiry/3217061-global-3d-printing-polymer-materials-industry-market-research-report

If you have any special requirements, please let us know and we will offer you the report as you want.

Table of Content:

Global 3D Printing Polymer Materials Industry Market Research Report 
1 3D Printing Polymer Materials Introduction and Market Overview 
    1.1 Objectives of the Study 
    1.2 Definition of 3D Printing Polymer Materials 
    1.3 3D Printing Polymer Materials Market Scope and Market Size Estimation 
      1.3.1 Market Concentration Ratio and Market Maturity Analysis 
      1.3.2 Global 3D Printing Polymer Materials Value ($) and Growth Rate from 2013-2023 
    1.4 Market Segmentation 
      1.4.1 Types of 3D Printing Polymer Materials 
      1.4.2 Applications of 3D Printing Polymer Materials 
      1.4.3 Research Regions 
          1.4.3.1 North America 3D Printing Polymer Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.2 Europe 3D Printing Polymer Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.3 China 3D Printing Polymer Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.4 Japan 3D Printing Polymer Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.5 Middle East & Africa 3D Printing Polymer Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.6 India 3D Printing Polymer Materials Production Value ($) and Growth Rate (2013-2018) 
          1.4.3.7 South America 3D Printing Polymer Materials Production Value ($) and Growth Rate (2013-2018) 
    1.5 Market Dynamics 
      1.5.1 Drivers 
          1.5.1.1 Emerging Countries of 3D Printing Polymer Materials 
          1.5.1.2 Growing Market of 3D Printing Polymer Materials 
      1.5.2 Limitations 
      1.5.3 Opportunities 
    1.6 Industry News and Policies by Regions 
      1.6.1 Industry News 
      1.6.2 Industry Policies

……

8 Competitive Landscape 
    8.1 Competitive Profile 
    8.2 TLC Korea 
      8.2.1 Company Profiles 
      8.2.2 3D Printing Polymer Materials Product Introduction 
      8.2.3 TLC Korea Production, Value ($), Price, Gross Margin 2013-2018E 
      8.2.4 TLC Korea Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.3 Orbi-Tech 
      8.3.1 Company Profiles 
      8.3.2 3D Printing Polymer Materials Product Introduction 
      8.3.3 Orbi-Tech Production, Value ($), Price, Gross Margin 2013-2018E 
      8.3.4 Orbi-Tech Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.4 Taulman3D 
      8.4.1 Company Profiles 
      8.4.2 3D Printing Polymer Materials Product Introduction 
      8.4.3 Taulman3D Production, Value ($), Price, Gross Margin 2013-2018E 
      8.4.4 Taulman3D Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.5 Arevo 
      8.5.1 Company Profiles 
      8.5.2 3D Printing Polymer Materials Product Introduction 
      8.5.3 Arevo Production, Value ($), Price, Gross Margin 2013-2018E 
      8.5.4 Arevo Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.6 Stratasys 
      8.6.1 Company Profiles 
      8.6.2 3D Printing Polymer Materials Product Introduction 
      8.6.3 Stratasys Production, Value ($), Price, Gross Margin 2013-2018E 
      8.6.4 Stratasys Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.7 LG Chem 
      8.7.1 Company Profiles 
      8.7.2 3D Printing Polymer Materials Product Introduction 
      8.7.3 LG Chem Production, Value ($), Price, Gross Margin 2013-2018E 
      8.7.4 LG Chem Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.8 DuPont 
      8.8.1 Company Profiles 
      8.8.2 3D Printing Polymer Materials Product Introduction 
      8.8.3 DuPont Production, Value ($), Price, Gross Margin 2013-2018E 
      8.8.4 DuPont Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.9 3D HUBS 
      8.9.1 Company Profiles 
      8.9.2 3D Printing Polymer Materials Product Introduction 
      8.9.3 3D HUBS Production, Value ($), Price, Gross Margin 2013-2018E 
      8.9.4 3D HUBS Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.10 3dsystems 
      8.10.1 Company Profiles 
      8.10.2 3D Printing Polymer Materials Product Introduction 
      8.10.3 3dsystems Production, Value ($), Price, Gross Margin 2013-2018E 
      8.10.4 3dsystems Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.11 Materialise 
      8.11.1 Company Profiles 
      8.11.2 3D Printing Polymer Materials Product Introduction 
      8.11.3 Materialise Production, Value ($), Price, Gross Margin 2013-2018E 
      8.11.4 Materialise Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.12 Rahn 
      8.12.1 Company Profiles 
      8.12.2 3D Printing Polymer Materials Product Introduction 
      8.12.3 Rahn Production, Value ($), Price, Gross Margin 2013-2018E 
      8.12.4 Rahn Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.13 Exone 
      8.13.1 Company Profiles 
      8.13.2 3D Printing Polymer Materials Product Introduction 
      8.13.3 Exone Production, Value ($), Price, Gross Margin 2013-2018E 
      8.13.4 Exone Market Share of 3D Printing Polymer Materials Segmented by Region in 2017 
    8.14 MATTERHACKERS 
    8.15 DSM 

Continued…..

Norah Trent
WiseGuy Research Consultants Pvt. Ltd.
+1 646 845 9349 / +44 208 133 9349
email us here


Source: EIN Presswire

The New Mexico Dental Association Selects PCIHIPAA as an Endorsed Partner

The endorsement of PCIHIPAA is key to helping New Mexico dentists comply with HIPAA mandates and to provide solutions to protect practices.

Today, it's more important than ever that we help our members understand the risks surrounding patient data privacy and security.”

— Thomas Schripsema, President, New Mexico Dental Association. 



ALBUQUERQUE, NEW MEXICO, UNITED STATES, June 26, 2018 /EINPresswire.com/ — The New Mexico Dental Association (NMDA) welcomes PCIHIPAA as a new Endorsed Partner. PCIHIPAA will help protect NMDA members from the onslaught of ransomware attacks, HIPAA violations, and data breaches impacting dental practices throughout New Mexico. Under HIPAA’s Security and Privacy Rules, healthcare providers are required to take proactive steps to protect sensitive patient information. The partnership comes on the heels of an important announcement surrounding HIPAA compliance regulation. The Director of the U.S. Department of Health and Human Services’ Office for Civil Rights recently stated, "Just because you are a small medical or dental practice doesn't mean we're not looking and that you are safe if you are violating the law. You won't be." In addition, according to the HHS website, a New Mexico dentist had 3,677 patient records stolen in January, 2018. Patient records are valuable to hackers as they continue to monetize the stolen data on the dark web.



“The New Mexico Dental Association has been part of the dental community in New Mexico since 1908. Today, it's more important than ever that we help our members understand the risks surrounding patient data privacy and security. We vetted many HIPAA compliance providers and believe PCIHIPAA’s OfficeSafe Compliance Program is the right solution for our members. We endorse PCIHIPAA and welcome them as part of our wonderful community of dentists. Their program takes the guesswork out of HIPAA compliance and is easy to implement. Our Members will experience savings, convenience and peace of mind." said Thomas Schripsema, President, New Mexico Dental Association. 



According to the U.S. Department of Health and Human Services, OCR has received over 150,000 HIPAA complaints following the issuance of the Privacy Rule in April 2003. A rising number of claims filed under HIPAA in recent years have led many patients to question whether or not their personal payment and health information is safe. As the government has become more aggressive in HIPAA enforcement, large settlements have become widespread and rising penalties for HIPAA non-compliance are a reality.

 According to HHS.gov, the types of HIPAA violations most often identified are:


1) Impermissible uses and disclosures of protected health information (PHI)

2) Lack of technology safeguards of PHI

3) Lack of adequate contingency planning in case of a data breach or ransomware attack

4) Lack of administrative safeguards of PHI

5) Lack of a mandatory HIPAA risk assessment

6) Lack of executed Business Associate Agreements

7) Lack of employee training and updated policies and procedures

“We are proud to be added as an Endorsed Partner of the New Mexico Dental Association. They have a long and proud history of helping dentists succeed and prosper. Our program helps protect healthcare professionals with what they have worked so hard to achieve. If Equifax can get breached so can a dentist. We find that many practices don't have the resources to navigate HIPAA law, and are unaware of common vulnerabilities. We're excited to work with the NDMA and invite every member to conduct a complimentary Self-Assessment to quickly identity key vulnerabilities in their practice.” said Jeff Broudy, CEO of PCIHIPAA.

##

The New Mexico Dental Association
The New Mexico Dental Association is the comprehensive and trusted voice of dental health care in New Mexico. As the premiere dental association in the state, the NMDA is responsible for advocating for the art and science of dentistry on behalf of the people of New Mexico. The NMDA was formed in 1908, four years before New Mexico’s official statehood, making it one of New Mexico’s oldest professional organizations.

About PCIHIPAA
PCIHIPAA is an industry leader in PCI and HIPAA compliance by providing turnkey, convenient solutions for its clients. Its OfficeSafe Compliance Program is "award winning" and takes the guesswork out of compliance while providing the assurance and insurance healthcare providers need to protect their future. PCIHIPAA was recently voted one of the Top 10 Healthcare Compliance Company's of 2017. Learn more at OfficeSafe.com and PCIHIPAA.com

Jeff Broudy
PCIHIPAA
8185198597
email us here


Source: EIN Presswire

Tarps Now Launches Premium Grade Tarps for Farming

Tarps Now® Expands its Product Roster to Include High Grade Tarps for Hay Farming

ST. JOSEPH, MICHIGAN, UNITED STATES, June 26, 2018 /EINPresswire.com/ — ST. JOSEPH, MICHIGAN, UNITED STATES – Increased demand for Hay Tarps and related high grade agricultural tarp coverings has proven to be a catalyst for expanding offerings of tarps and coverings used in the production of hay and other farm products. Noting that unprotected hay is subject to 25 percent loss due to weathering and exposure, Tarps Now has underwritten the manufacture high quality Heavy Duty Hay Tarps that feature reinforced poly material that are also resistant to Ultra-Violet Radiation. This approach is being used because to increase farm profitability, as lower grade fabrics often used by farmers across North America were far less durable.

In addition to the premium grade of fabrics utilized, the premium grade of hay tarps manufactured also feature brass spur grommets every two feet and 2-inch loops of webbing every four feet along the perimeter. This proprietary design ensures secure fitting and easy anchoring of ropes, spiral pins, pipes and posts.

Heavy Duty Farm Hay Tarps:

Manufactured in the United States, Tarps Now Hay Tarps have a silver exterior to reflect sunlight and reduce interior heat. Not only do hay tarps protect your product from damaging outdoor elements; the hay tarps also organize and consolidate your hay, providing easier transporting to indoor storage. To suit your needs, we offer our hay tarps in a variety of sizes.

Tarps Now® Farming Tarp Products:

https://www.tarpsnow.com/hay-tarp.html
https://www.tarpsnow.com/heavy-duty-tarps.html
https://www.tarpsnow.com/heavy-duty-vinyl-tarps.html
https://www.tarpsnow.com/waterproof-canvas-tarps-breathable-tarps.html
https://www.tarpsnow.com/heavy-duty-poly-tarps.html
https://www.tarpsnow.com/heavy-duty-vinyl-mesh-tarps.html
https://www.tarpsnow.com/hypalon-tarps-csm-tarps.html
https://www.tarpsnow.com/neoprene-coated-nylon-tarps.html
https://www.tarpsnow.com/construction-tarps.html
https://www.tarpsnow.com/construction-tarps.html
https://www.tarpsnow.com/industrial-tarps.html
https://www.tarpsnow.com/industrial-covers.html
https://www.tarpsnow.com/truck-tarps.html
https://www.tarpsnow.com/airbag-tarps.html
https://www.tarpsnow.com/canvas-tarps.html

About Tarps Now®

Tarps Now® features an extensive online catalog of heavy duty tarps, canvas tarps, poly tarps, custom tarps, vinyl tarps and industrial divider curtains. As specialists in custom canvas and vinyl tarps, they are the low-price leaders in their category. The company offers the convenience of fast, easy, online ordering as well as a knowledgeable staff to guide customers through the specification process insuring their project will be completed on time and in budget. Tarps Now® has the experience and scale to insure customer specifications are carefully followed and expectations exceeded for every project, large or small.

Michael Dill
Tarps Now, Inc.
8888001383
email us here


Source: EIN Presswire

Working towards a more environmentally sustainable future – Global Youth Summit 2018

Student delegation at the Global Youth Summit

Hon. Sarifa Younes, President of the International Academy of Marawi

Students collaborating at the Global Youth Summit

Globally, we have been struggling with a rapidly changing climate and environmental impact for many decades, the Global Youth Summit raises awareness of this.

We are raising the leaders and decision-makers of the next generation. Soon they are the people who will run our countries and make decisions that will impact our environment and our future.”

— President of International Academy of Marawi, Sarifa Younes

NATIONAL LIBRARY PLAZA, CITY, SINGAPORE, June 26, 2018 /EINPresswire.com/ — On a Global scale, we have been struggling with a rapidly changing climate and environment for many decades now, and the results of our reckless and complacent choices are alarming.

Melting polar-caps, plastic overrunning our oceans and pollution invading our air are just some of the concerns we are currently facing. Furthermore, according to the World Bank Group published in 2016, air pollution is now the fourth leading risk-factor to premature deaths globally – ranking higher than alcohol and drugs.

Authorities, researchers, newspapers and even your local council preach for change – a cleaner, more sustainable world to live in now and for the future. And, for the most part, we have taken remarkable steps to undo and prevent negative environmental impacts.  Yet, one of the greatest challenges lies in ensuring that the next generations are willing to take on social responsibility and step up to the plate to help save the planet. However, this is easier said than done.

According to the President of the International Academy of Marawi (IAM), Sarifa Younes, encouraging young people to get involved in climate change and the environment should be an integral part of the education and learning in primary, secondary and senior schooling.

“We are raising the leaders and decision-makers of the next generation. In just a few short years they are going to be the people who are running our countries and making decisions that will impact our environment in dramatic ways. Even just in their everyday actions,” Mrs Younes says.

“Therefore, it’s up to educators, in partnership with parents, to help children and young people understand the role they play in climate change and sustainable development for the future,” Younes adds.

As part of her initiative to get her students involved, Mrs Younes will be taking five students as well as teachers Farhannah Bayabao Sultan and Hanan Sata to Singapore to participate in the Action for Earth – Global Youth Summit 2018 (GYS), now in its fourth year.

The Youth-led summit is a 3-day annual conference that attracts hundreds of students from all over the world, with the aim of sharing about initiatives, projects – networking and engaging with other like-minded, forward-thinking young people about sustainable climate change solutions. The summit includes boot-camp style learning, challenges and an awards celebration for the most innovative projects – including cash prizes for the top three winners of Junior and Senior Categories.  

President of the Hemisphere Foundation, and founder of the Global Youth Summit, Ms Ann Phua, says, “The Global Youth Summit was created for our youth to learn and advocate actions for the earth. We want to inspire young people to never give up and to take action into their own hands.”

“It’s about self-empowerment and for the students to take what they learn at the Global Youth Summit back into their own communities. We can only continue to inspire them, so they may inspire others”, Ms Phua says.

Since its inception in 2014, the GYS has had over 282,000 students from 242 schools in 15 countries participate.

However, with the potential reach and scope of participants, Mrs Younes believes more schools should be engaging and putting their hand up to participate.

“I understand that it can be hard to get young people, especially children, excited about the environment. But, from my experience, the earlier you expose children to the topic, the easier it is to engage and inspire them to get involved and support the cause,” Mrs Younes says.

“I feel privileged to have been selected to attend the Global Youth Summit,” said 17-year-old Marziya Channa Imam Abinal, who attends grade 10 at IAM Academy. “I can’t wait to take our project there and to learn from all those other teachers and students at the summit.”

Grade seven IAM student, 15-year-old Ziyaadh Capal Ampaso, said, “It will be amazing to see what other schools in other countries are doing for the environment. I look forward to learning a lot at the summit and to bringing it all back home to our academy to share.”

The International Academy of Marawi (IAM) is committed to open global doors for it’s students and to make a positive impact on the environment across many generations to come. This is the third year the international academy participates in the event.

“We spend much time teaching children to engage with their peers in a positive and encouraging way – why can’t we implement this theory to how we engage with the environment,” Mrs Younes adds.

With the Global Youth Summit set to kick-off on June 28 – 30, there is still time to get involved. For more information, visit the Actions for Earth website.

Erik Ralf Bigalk
Smart Solutions
+61280057732
email us here


Source: EIN Presswire